Introduction

A brand new SSD requires proper installation and configuration to function optimally. This guide will walk you through installing and setting up the iDsonix SSD.

Since our SSD product drivers are integrated into most modern systems, you typically won't need to install them manually.

Required Tools

  • Screwdriver
  • Heat sink (recommend)
  • New iDsonix NVMe M.2 SSD

We recommend installing a heatsink, which can effectively reduce the SSD's operating temperature, extend its lifespan, and improve operational stability.

Safety Precautions

  • Power down your computer completely
  • Unplug all cables from your computer
  • Ground yourself to prevent static electricity discharge

Physical Installation Steps

  1. Equip the heatsink with the iDsonix SSD
  2. Locate the M.2 slot on your motherboard
  3. Insert the M.2 SSD at a 30-degree angle into the slot
  4. Secure the SSD with the mounting screw (included with your motherboard)
  5. Verify that the SSD is firmly seated and properly secured

Drive Initialization in Windows

Important: The initialization process will erase all data on the disk. Do not proceed with initialization if your disk contains important files.

After Windows starts up, your new disk might not appear in File Explorer. Don't worry—this is normal because the drive needs to be initialized first:

  1. Open Disk Management:
    • Type "Create and Format Hard Disk Partitions" in the taskbar search box
  2. If prompted to initialize the disk, select GPT (GUID Partition Table) - recommended for most modern PCs and drives over 2TB
    • if the disk is listed as offline, right click it and select online
  3. Right-click the unallocated space and select "New Simple Volume"
  4. Follow the wizard to:
    • Specify volume size (recommended to use default size, which is the entire drive)
    • Assign a drive letter
    • Format the partition (use NTFS file system)
    • Name your drive

Troubleshooting

If the drive isn't recognized, try these general troubleshooting steps:

  • Check physical connection and reseat if necessary
  • Ensure your motherboard supports NVMe

BIOS-Related Issues

Please note: Modifying BIOS settings requires extreme caution. Incorrect BIOS settings may prevent system boot-up or cause other serious issues. If you are unfamiliar with BIOS operations, it is recommended to make these changes under the guidance of an experienced person.

If the disk is not showing up in disk management, check these BIOS settings:

  • Enable M.2 slot in BIOS (consult your motherboard manual)
  • Toggle CSM (Compatibility Support Module) setting
  • Update motherboard BIOS if needed

References:


Need an new SSD? Click here to purchase one: amzn.to/3WotObU